The following add-ons are helpful for narrow aisle forklifts:
Side shift: Side shift is an option which allows the lateral movement of the load without having to move the model. This enables loads to be positioned with a lot more accuracy.
Tilt mast: The tilt mast option enables the forks to shift backwards and forwards. This is recommended in situations where loads aren't completely level. To be able to gain greater stability when transporting a truck which is loaded, the mast can be tilted backwards.
Extendable forks: The option of extendable forks helps the "reach" of the forklift to extend for stacking pallets one in front of the other, referred to as "double-deep" loading.
Operator platforms: Operator platforms allow some NA forklifts to raise and lower the operator whilst the forks are being lowered or raised. This offers optimum control and visibility while dealing with loads at heights of 6 m to 9 m.
Forklift on a Ramp
Drivers need to be correctly trained and should be assessed and licensed. It is really important for anyone operating a forklift to be educated about safety rules and problems. Operators should know how to adjust in situations where the weight of the load alters the center of gravity or on uneven surfaces. Safety guidelines include the safe operation of a forklift on a ramp, which is a frequent occurrence as the driver would typically have to drive down and up ramps to be able to load and unload containers.
Guidelines for Using a Lift Truck on a Ramp
1 While approaching and driving up and down the ramp, drive at slow speeds. The possibility of accidents is higher while driving at high speeds because this can upset the machine's center of gravity.
2 Drive the lift truck in reverse when moving up an incline on a ramp while not carrying a load.
3 When moving down an incline on a ramp with no load, drive forward.
4 Tilt the forks slightly back to shift the center of the load to the equipment's front, when moving down or up a ramp while carrying a load.
5 Drive forward up a ramp while carrying a load to make the load more steady.