Nearly all of the time, businesses will spend a lot of money to purchase their lift trucks. It is essential, therefore to take good care of your machine to protect your investment into the long run. It is a good idea to know the procedures which are carried out during taking care of and maintaining this machinery.
Among the best ways to tell how good the engine is performing is by starting the forklift up and listening closely to see how it works. Like for example, if there are any knocks or misses, the machinery is defective and this must raise some concerns. What's more listen closely for any squealing sounds that come from the belts since these sounds would provide you with a lot of information.
When carrying out maintenance, several of the main parts you would need to pay attention to include the safety warning devices, horn, the overhead guard, the lights and the gauges. Any faulty parts or burnt out light bulbs have to be replaced as soon as they are noticed. It is also essential to inspect the wiring.
The battery compartment terminals should be cleaned when the above components have been checked carefully. If the terminals are not clean, be sure to clean them properly. Each and every cell of the battery should be checked so as to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machine and then change the filters. The fuel filters, hydraulic filter and the transmission filter should be replaced regularly. Before fitting them, be sure to write the date on the new filters by using a permanent marker in order to keep track.
When the oil change has been done and new filters have been fitted, visually inspect the drive axle from underneath the machinery. Be sure to grease the axle if there is any grease fitting. Check the belts on the engine for any cracks or frays. If you find any, fix the issue accordingly. Next, inspect each and every other component of the equipment including the wheels. If any type of fault or problem is detected, be sure to address it immediately in order to make sure the machine is running at its safest and optimum levels.